EnglishFor the convenience of lighting, many people will install wall lamps on the wall. Compared with other lamps, the decorative effect of wall lamps is also good. How is the wall lamp installed? After the wall lamp is bought, it needs to be installed, but there are many people. But I don't know the specific installation matters, let's take a look at how to install the wall lamp.
How the wall lamp is installed:
1. The installation of the wall lamp should be marked on the wall where the expansion screws need to be screwed according to the holes on the hanging board of the wall lamp. Use an electric drill to drill holes on the marked points on the wall. Pay attention to understand the wiring layout first, do not drill into the wires, and the depth of the drilling must also be grasped.
2. After the hole is drilled, you can start to install the expansion screw. First insert the expansion screw into the drilled hole, and then use a hammer or other things to drive the expansion screw into the wall until it is completely submerged in the wall. Pass the wood screw through the hole of the wall lamp hanging plate, and then fix it on the expansion screw. Pay attention to the fixing on both sides alternately to avoid the deviation of the wood screw.
3. Connect the hanging plate and the ceiling plate with screws, and then screw on the bald screws to fix the ceiling plate. Finally, disconnect the indoor power supply, then connect the wires of the wall lamp and the power cord, and then install the wall lamp.
